
 
| |
4" Submersible Pump Product
- Stainless steel discharge.
- Anti-up-thrust set screw prevents impeller drag at startup and low
head application. Increased pump life.
- Extra large graphite-impregnated bronze bearing runs cool and
quiet while providing perfect shaft alignment
- Stainless steel tubing provide corrosion resistance and long life.
- Stainless steel cable guard protects motor leads during
installation and pump start-up.
- Impellers are made of abrasive resistant high strength
glass-filled noryl.
- High efficiency noryl diffusers provide for larger O.D. impellers.
- Pump shaft in 7/16" hex series 400 stainless steel.
- Stainless steel suction screen, completely non-corrosive, protects
pumping elements from harmful materials.
- Motor coupling is a one piece sintered stainless powdered metal
part. Then 7/16 hex shaft is locked in with a screw and with lock-tite
applied to the threads.
- One piece motor bracket and suction are supplied in stainless
steel.
NOT SHOWN
Lead free bronze external check vavle supplied on all pumps.
Screw, nuts and washers are stainless steel.
Motors are Franklin Electric, lightning protected super stainless. |
 |
 |
- Stainless steel discharge with brass external check
valve. Designed to prevent vortexing and premature check valve
failure. Guide veins cast into discharge permit easy removal from
wells where pump is installed below well casting.
- Convenient mounting port for submersible safety cable.
- O-ring gasket provides positive seal between discharge housing and
stainless steel tube assembly. Increases efficiency and prolongs
pump life.
- Case hardened steel cone point set screw, pre-adjusted at the
factory, provides permanent and positive up-thrust protection for
the life of your Betta Flo submersible pump and allows your pump to
be used in all water levels without damaging the pump.
- Stainless steel locking nut permanently locks pump stack so that
impellers do not float. Provides longer life and reduces sand damage
and allows quiet, smooth operation.
- Full 1-1/2" long graphite impregnated bronze bearing.
Self-lubricating. Provides extremely long life and will not seize if
pump breaks suction.
|
|